1/10th Tacon Pursuer On Road Car Brushless Ready To Run (Black) RC Remote Control Radio Car With 7.4V 3800mah Lipo Battery

The Tacon is a 1/10 scale on road car . It was designed from the ground up with pure performance in mind. Performance features derived from 1/8 scale vehicles have been shrunken down in size and engineered to deliver the utmost performance in a small on road car package. A 2mm thick aluminum chassis serves as the base of this on road car. Mounted on the front and rear is 2.5mm thick 6061-T6 anodized aluminum shock towers towering over the metal geared fluid filled differentials. Attached to the robust towers are aluminum threaded oil filled shocks providing plush and ground hugging dampening. The steering tie rods and upper and lower arms are adjustable for fine tuning of the toe and camber, effectively altering the handling characteristics of the car.

This car has awesome power to weight ratio. Weighing in at slightly over 2 lbs, the vehicle is easily propelled by the 380 sized 4500KV brushless motor. A 80 amp programmable brushless electronic speed controller delivers the current efficiently through an included 7.4v 3800mah LIPO battery. All of this power transfers through a shaft driven four wheel drive system providing ground clawing action through the performance wheels and rally spec tires.

The Tacon ready to run package also includes a 2.4ghz radio system. With frequency hopping technology, interference is a thing of the past. No longer do you have to worry about your specific channel. The radio system will automatically take care of that for you while you are focused on handling this beast of a machine.

With a body designed with on road car looks and aerodynamic performance, combined with a roof spoiler on the rear hatch. This scale on road machine will put a huge smile on your face when you see it four wheel power sliding through a corner spitting dirt and debris out the rear end.

 

Features:
1. Tacon design 1/14 rally tires
2. Tacon design slipper pad with adjustable gear cover
3. Aluminum-threaded, oil-filled, coil-over, 6061-T6 ajustable shocks
4. 2.5mm 6061-T6 aluminum shock towers
5. Front and rear metal gear differentials
6. 80A programmable ESC, Lipo 2S/3S compatible.
7. 4 pole 6.5T 2850 4500KV brushless motor
8. 4WD shaft drivetrain
9. Adjustable mini servo with saver
10. Steel hinge-pins with rounded front bumper
11. Tacon receiver with 2.4GHz technology
12. 7.4V LIPO 3800mAh battery with 3.5mm gilded round connectors
13. 2.5mm anodized aluminum rear and front kick-up chassis with dirt guards
14. 12mm wheel hexes

Specifications:
Scale: 1/10
Length: 430mm (17in)
Width: 190mm (7.5in)
Height: 120mm (4.7in)
Wheelbase: 250mm (9.85in)
Weight: 1.3kg (2.8lbs with battery)
Tire Type: Tacon Rally Tread
Chassis: 2.0mm anodized aluminum
Motor or Engine: 4500Kv 2850 brushless motor
Gear ratio:8.23
Speed Control: 80A Brushless
Radio: 2.4GHz Technology
Batteries: 7.4V LIPO with 3.5mm gilded round connector, Charger not included
Shock Type: Aluminum-threaded, oil-filled, coil-over, 6061-T6 ajustable
Ball Bearings: Complete

 

Package Contents:
100% Assembled
1x 1/10 Tacon Pursuer
2CH 2.4Hz Transmitter and receiver
1x 7.4v 3800mAh LIPO battery
1x Instruction Manual

Required to Run:
AA Batteries for Transmitter
LIPO Charger

Note: Optional, support 2 to 3 cells lipo batteries

************************* BATTERY CHARING INSTRUCTIONS *****************************
To fully charge the battery, please charge the car battery for 12 hours first time.
After the initial charge of 12 hours, each charge after that is 4 hours long.
*****************************************************************************************************